Garażowa wytwórnia toreb rowerowych i akcesoriów do bikepackingu.
Dagabum cage (one piece)
€13,00 – €18,00
The Dagabum cage is a minimalist “anything cage” type rack, designed to be mounted on the front fork. Its slim shape also allows it to be attached to a frame. Dagabum cage is a platform for stable transportation of cargo with a maximum weight of 2kg and a maximum circumference of 46-48cm. The cage is made of laser-cut aluminum. has been powder-coated.
Mounting with either two or three screws
A PET G plastic module is added to the basket. screwed at the bottom, it significantly increases the support surface of the bag and stiffens the whole structure. The module was printed on a 3d printer.
Dagabum Cage comes with two 65cm long transport straps and 3d printed (PETG) support extension module
The basket is best used together with a fork bag, which can be purchased separately.
Made in Poland
SPECIFICATIONS
Dagabum cage
Dimensions: 230mm*50mm*38mm (60mm with extension module)
Weight: 70g
3mm aluminum
Painting: powder coating, textured matte black colour
M5*14mm steel bolt 3pcs.
Transport strap
Material: nylon webbing of Polish manufacture (Pasamon)
Regulator: ITW NEXUS
Dimensions: length 60cm, width 2cm
Weight: 18g/piece
Two transport straps are added to the cege.
3d printed extension module
Dimensions: 40mm*60mm*
Weight: 20g
PETG
USAGE
The Dagabum cage is designed only for mounting to a bicycle. The ideal place for this gear is on the front fork, but you can test other places on the frame. Do not mount it on a motorcycle, car, scooter or other vehicles. This risks disability, death or worse, a failed bicycle trip!
Dagabum cage is not designed to be mounted on children’s bicycles.
Bicycle frames and forks are different, so always stick to their limitations. If you are not sure if the cage can be hung where you want it, ask your mechanic. Steel frames allow for experimentation. Sports bike, with a shaded frame is better left alone and mount the basket only on the fork. Do not exceed the weight of 2kg of cargo.
ASSEMBLY
The cage can be attached to the frame/fork with a screw or zip ties…. Always try to secure the frame/fork before mounting (with tape or washers). When you mount the basket with screws, be careful about the strength of the threads in the fork/frame (there is usually a marking with the maximum screwing force). It is best to mount the basket with three screws. If you have only two holes in the fork, it may mean that the maximum weight of the load you are carrying may be less than 2kg (in this case, consult your mechanic). When you assemble the basket with tritecks, tighten them by hand. Then you are sure that you will not damage your damper. If you are tightening the trithets with a tool, remember not to overdo the force. The best way is to fix the cage with four tritecaps. Tighten the washer so that the closed tritetone does not touch the frame/damper at any point.
CARBON FRAME/FORK: do not use tritones, screw the cage in place and with the force provided by the frame/fork manufacturer.
WHILE DRIVING
Try to drive with a load. Remove the cage after the trip.
When driving “empty”, never leave the transport straps in the cage.
Try to squeeze the load as much as possible. During the trip, check from time to time for
looseness. It is best to carry soft items such as clothes, mats, towels, sleeping bags, a tent (without poles), etc.
